Combination Stirring Hotplates
Electron Microscopy Sciences Corning Digital PC-420 Hot Plate/Stirrer, 220 V, 60-1150 RPM
Pyroceram glass-ceramic stirring hot plates features a microprocessor with digital display that regulates heating and stirring. Consistent and repeatable temperature is maintained from 25 °C up to 550 °C and is adjustable in 5 °C increments. Display blinks until temp is reached and LED HOT TOP icon lights up when top plate is over 60°C and separate temp sensor provides power cutoff if unit overheats.
An optional external temp controller is available for inside the vessel and will shut off unit when is not in liquid. Stirring speed range is from 60-1150 RPM. Stronger, larger magnet improves stir bar coupling combined with automatic up speed adjustment minimizes decoupling. The two piece casting design deflects spills away from electronic and includes a built in mount for an optional 18" support rod. UL and cUL approved.
Heating surface: 10" x 10"
Range: 25-550°C
RPM: 60-1150
Weight: 11.5 lb
Footprint: 15.8 x 10.6"
Electron Microscopy Sciences SUPER-NUOVA™ Hot Plate Ceramic Top, 220 V
Digital hote plate features a rugged low profile cast aluminum body provides stability and durability and a warning system that deters accidental contact with hot surface. The Remote probe allow for accurate reading of solution temperature to 0.1°C for temperature below 100°C. A user-adjustable over-temperature protection prevents runaway temperature conditions. Seamless reflective easy-to-clean, alkali/acid resistant white ceramic top.
Surface: 10.5"x10.5"
Research Products International Corp Digital Hot Plate Stirrer, 12x12" Aluminum Top
Digital Hot Plate Stirrer, 12x12" Aluminum Top
Braintree Scientific Optional Support Rod for Digital Hot Plate
Optional Support Rod for Digital Hot Plate **Sold for research purposes only and not for human use**
Research Products International Corp Digital Hot Plate Stirrer, 12 x 12 Inch Ceramic Top
The EchoTherm HS51 is designed to be the easiest to use and most accurate fully featured stirring hot plates in the world. Temperature measurement of a solution is accurate to 1% over the entire temperature range using a 100 ohm platinum RTD sensor and measurement system. Calibration of temperature is electronic and stored in memory. The calibration is set at the factory but can be done easily in the field using the probe calibration kit offered as an accessory. The chassis on both models is cast aluminum designed to keep spills and heat out of the electronics. They are coated with chemically resistant epoxy based paint for durability.
Andwin Scientific 12X12 CERAMIC HOTPLATE 115V EA
The 115V hot plate features a 12x12 corrosion-resistant ceramic top ideal for high temperature applications housed in an aluminum frame for cooler edges. It also boast an epoxy-coated cast-aluminum body for maximum durability and stability. The temperature range runs from 49 to 450C. The unit includes a 6ft cord with plug.
Chemglass Life Sciences Aluminum Extension Plate
Extension Plate. Aluminum extension plate fits on top of all 135mm diameter circular top hot plate stirrers. Increases the surface area from 135mm to 200mm.
JDM SCIENTIFIC LLC 15 POSITION HOT PLATE STIRRERS
15 Position Hot Plate Stirrer with elegant and space-saving design. Simple to use with variable speed and temperature control.
Chemglass Life Sciences AREX-6 CONN.PRO AREX-6 with probe, with Vertical Support Rod, Boss Head, and Support/Holding Rod, 115V/60hz Cloud-Enabled Hot Plate Stirrer with Timer.
Velp Wifi enabled 135mm round top DIGITAL hot plate stirrer system with built in timer. Hotplates feature many exclusive features and improved safety enhancements. The 135mm diameter heater top is scratch proof and chemically resistant. The integrated TIMER provides an additional layer of safety ensuring the hotplate heater is "off" after the elapsed time (settable from 1min to 99h: 59min). TRU-RPM stirring provides very accurate mixing speeds through the entire RPM range from 30 to 1700 rpm. The back corner of the housing has an M8 female thread to accept a vertical support rod. The updated interface, with easy to read, illuminated icons, create a very user-friendly experience. New and improved knobs and buttons assure simple and intuitive control of the hotplate stirrer.
Cole-Parmer Five-Position Stirring Hot Plate, 120 VAC
These multiposition stirring hot plates offer more versatility than single-position units. Stirring hot plates are available with five or nine stirring positions. Each stirring position is individually controlled so you can perform different mixing applications simultaneously. Use stirring hot plates to heat only, stir only, or heat and stir simultaneously. The corrosion-resistant ceramic tops heat quickly and never warp or buckle. The temperature control has OFF, HI, and LOW detents/settings, with 270 degrees of infinite control between the low and high detents.